Working at Height (WAH) Safety Training

Working at height safety training at your site. Fall arrest, harness use, permit to work.

Also known in Malay as: keselamatan kerja di ketinggian

Also known in Malay as: kursus WAH

Book WAH Training WhatsApp Naja Safety
Fall protection safety harness and height work equipment

Working at Height (WAH) Safety is a one-day course for anyone who works at height or supervises it. It covers the legal duties, hazard identification and risk assessment, fall prevention and protection equipment, permit to work and rescue planning, with hands-on harness inspection and fitting. Naja Safety runs it at your site, anywhere in Malaysia.

1 day, longer on request On-site, anywhere in Malaysia English, BM & Mandarin HRD Corp claimable Certificate of Attendance

Who it's for

  • Technicians, maintenance workers and general workers
  • Supervisors, team leaders and Safety Committee members
  • Contractors, subcontractors and construction personnel
  • Facility management and operations staff
  • Anyone required to perform or supervise work at height

When you need it

  • Workers are accessing roofs, platforms or elevated structures. Fall from height is one of the most common causes of serious construction accidents.
  • New MEWP on site. Train operators before the machine moves.
  • Near-miss or incident involving a fall. Refresher training for the whole crew.
  • DOSH inspection or main contractor safety audit. Show that your team has been trained on fall prevention and rescue.

What your team walks away with

  • Understand Malaysian legal requirements and employer and employee responsibilities for work at height
  • Identify hazards associated with working at height and perform proper risk assessments
  • Select, inspect and use fall prevention and fall protection equipment safely
  • Apply safe work procedures, including scaffold safety, ladder safety, man-lift operations and rescue planning
  • Demonstrate practical skills through hands-on exercises and case study analysis

How it runs at your site

1

You send headcount and dates

WhatsApp your site location, number of workers and preferred dates.

2

We assess your structure and train on your equipment

We train on your actual structures, anchors, and equipment so the skills transfer immediately.

3

Practical demonstration and records

Hands-on harness, anchor and rescue demonstration. We hand over attendance records and certificates.

Syllabus

Module 1: Introduction to WAH

  • Definition of working at height (OSH standards)
  • Overview of OSHA 1994, FMA 1967, BOWEC and CIDB requirements
  • Roles and responsibilities of employer, employee and SHO
  • Common causes of WAH accidents in Malaysia
  • Unsafe practices, shown through Malaysian accident case videos
  • Case study: analysis of a real accident investigation report (fall from scaffold or roof)

Module 2: Hazard Identification, Risk Assessment and Risk Control (HIRARC)

  • Hazard identification at height: fragile surfaces, weather, roof edges, skylights
  • The HIRARC process for working at height tasks
  • Hierarchy of control (fall prevention versus fall protection)
  • Safe Work Procedures (SWP) and Job Safety Analysis (JSA)
  • Emergency and rescue planning requirements
  • Live demonstration of hazard spotting using photos and videos
  • Practical: group exercise to conduct a HIRARC for a roof-access scenario, and prepare a simple SWP from a template

Module 3: Prevention and protection systems

  • Types of fall protection systems (anchor points, PFPE, harness, lanyard, SRL)
  • Pre-use inspection of harnesses, lanyards and connectors
  • Correct donning, adjustment and use of a full-body harness
  • Ladder safety (extension and platform ladders)
  • Scaffold safety basics (access, guardrails, inspection tags)
  • MEWP and aerial lift safety (boom lift, scissor lift)
  • Equipment limitations, shock absorption and fall clearance calculations
  • Practical: hands-on harness inspection, and donning and fitting a harness

Module 4: Safe execution, permit to work and emergency rescue

  • Planning work at height (sequencing, safe access, supervision)
  • Permit to work for work at height (key elements and documentation)
  • Communication between workers, supervisors and the SHO
  • Rescue planning and key ERP requirements
  • Post-fall procedures and incident reporting
  • Summary of Malaysian best practice and risk-control strategies
  • Practical: set up a mock Work at Height permit; simulated safe access to a ladder or scaffold station
  • Case study: group discussion of two local WAH accident cases

How it is taught

  • Interactive lectures
  • Case studies and group discussions
  • Demonstration of PPE and fall protection systems
  • Hands-on practical exercises
  • Videos of Malaysian accident cases
  • Question-and-answer sessions

Frequently Asked Questions

What is covered in the Working at Height course?
Four modules over one day: the legal duties, hazard identification and risk assessment (HIRARC), fall prevention and protection systems, and safe execution with permit to work and rescue planning.
How long does WAH training take?
One day, at your site. Longer on request.
Can you train on our active construction site?
Yes. We prefer on-site delivery using your actual structures, anchors, and equipment. This makes the training immediately applicable and more memorable.
Can WAH training be claimed under HRD Corp?
Naja Safety is an HRD Corp registered training provider (listed in e-TRiS). Our programmes are HRD Corp Claimable — subject to your own HRD Corp registration status and the programme submitted. We will confirm before you commit.
How many participants per session?
It depends on the course and the venue. Tell us your headcount and we'll plan the sessions around it.
Is there hands-on practice?
Yes. Participants inspect and fit a harness, run a HIRARC for a roof-access scenario, prepare a safe work procedure, and set up a mock Work at Height permit.
Which laws does it cover?
An overview of the Occupational Safety and Health Act 1994, the Factories and Machinery Act 1967, BOWEC and CIDB requirements, and the duties of employer, employee and SHO.
Does it cover scaffolds, ladders and MEWPs?
It covers scaffold and ladder safety basics and MEWP and aerial lift safety (boom and scissor lifts). For operator-level MEWP training, see the MEWP safety course.
Who should attend?
Technicians, maintenance and general workers, supervisors, contractors and subcontractors, facility staff, and anyone who performs or supervises work at height.

Cari dalam Bahasa Melayu

This course is also searched as keselamatan kerja di ketinggian and kursus WAH.

Train Your Crew to Work Safely at Height

Fall arrest, harness, MEWP and rescue training at your site anywhere in Malaysia. We reply within one working day.

WhatsApp your headcount and site Request Training Schedule

We come to you

In-house training for company groups, in person at your premises, anywhere in Malaysia.

  • Hours: 9am to 5pm for each training day.
  • Included: slide handouts and a certificate of attendance for each participant who completes the course.
  • You provide: a training room, a projector and light refreshments.
  • HRD Corp: claimable, subject to HRD Corp terms and conditions.
  • Dates: set to suit you, subject to HRD Corp grant approval if you claim.
  • Who we train: company and organisation groups. We don't run classes for individuals.
Chat on WhatsApp
Chat on WhatsApp